Review the latest reports of scientific tests performed with PuriFi Products

PuriFi has been tested in a number of challenging environments replicating real-world conditions.

PuriFi Test Reports

CARB Certified: Meets California Ozone Emissions Limit


PuriFi IQ and HC air and surface purification devices have obtained CARB certification, ensuring they meet the strict standards of the California Air Resources Board (CARB). This certification guarantees that our products comply with the ozone emission standards for indoor air cleaning devices.

View Reports: Certification Letter, PuriFi IQ Low Flow Rate, PuriFi IQ High Flow Rate, PuriFi HC Low Flow Rate, PuriFi HC High Flow Rate.


The PuriFi Labs device demonstrated a 92% total airborne reduction of SARS-CoV-2 B.1.1.529 (Omicron Variant in 29 minutes with a progressive reduction of 99.998% in 59 minutes.

Under real-world test conditions. PuriFi AMP Technology inactivates tested airborne virus B.1.1.529 (Omicron) Variant.

The PuriFi Labs device demonstrated a 95% total airborne reduction of SARS-CoV-2 B.1.617.2 (Delta) Variant in 29 minutes, with a progressive reduction of 99.999% in 59 minutes.

Under real-world test conditions, AMP technology by PuriFi inactivates tested airborne SARS-CoV-2 B.1.617.2 (Delta) Variant

The PuriFi Labs device demonstrated a 97.51% total airborne reduction of SARS-CoV-2 in 29 minutes.

PuriFi AMP technology neutralizes tested envelope virus SARS-CoV-2 in real-world conditions for central HVAC systems.

Air Handler unit equipped with PuriFi, operating at 350 CFM, and no air filter, achieved 99% total neutralization within 60 minutes (Total neutralization includes effects from PuriFi, air flow, and natural decay).

PuriFi AMP technology tested by the EPA's Homeland Security Research Division under highly rigorous HVAC mechanical conditions.

Test results prove consistent SARS-CoV-2 deactivation rates of ≥ 3.23% per minute, achieving 99.994% viral inactivation withing minutes.

The testing, shown on page 10 paragraph 2, represents two different test results. The first test in the graph introduces the surrogate virus into the room and turns on the IONaer (PuriFi) at the same time, resulting in a 99.82% reduction in 33 minutes. The second test allowed the IONaer 7000 (PuriFi) to run for 10 minutes, then introduced the virus into the room, resulting in a 99.994% reduction in 10 minutes.

Document indicates the size of the room in which tests were performed. The size would be equal to a typical hospital room.

Depicts the results on E. coli, A. baummanii (mold), S. aureus (Staph), and non-enveloped viral surrogate Norovirus MS2.

Graphs the live data illustrate the speed of particulate reduction in homes or businesses when the sensor sends the signal to activate the IONaer 7000 (PuriFi). Customers can access this data in real-time through the PuriFi App.

Test results show the IONaer 7000 (PuriFi) reduced the ambient ozone from 15 ppb to 5 ppb after 8 hours of operation @ 300 CFM.

Test results show the IONaer 7000 (PuriFi) reduced the ambient ozone from 12 ppb to 8 ppb after 8 hours of operation @ 1500 CFM.

Diagram illustrates the testing rig Underwriters Laboratories (UL) used for testing.

Are You Ready to Experience Clean Air?

Meet with an Air Quality Management Specialist at our Scottsdale Experience Center, or contact us to learn how PuriFi can transform your space.

© Copyright 2024. Marketing Optimization Partners LLC. All rights reserved.